Product ID:12018-M2, ALLOY RODS ATOM ARC LOW HYDROGEN (SUPDAT)
MSDS Date:03/06/1995
FSC:3439
NIIN:00N085664
MSDS Number: CHCSK

ESAB GROUP INC

801 WILSON AVENUE
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: HO829

ESAB GROUP INC

517 HANOVER, PA 17331 US

Telephone: 717-637-8911

Cage: HO829

MANGANESE; (MN) (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2-3%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 2-3%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

CALCIUM CARBONATE; (CACO*3)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CALCIUM FLUORIDE; (CAF*2)

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (F) (MFR)

ACGIH TLV: 2.5 MG/M3 (F) (MFR)

SILICON; (SI)

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICA, CRYSTALLINE - QUARTZ; (SIO*2)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL 0.1 MG/M3 RDUST(MFR)

ACGIH TLV: 0.1 MG/M3 RDUST

SILICIC ACID (H*2SIO*3), DISODIUM SALT; (SILICATE BINDER)

CAS: 6834-92-0

RTECS: VV9275000

OSHA PEL 5 MG/M3 RDUST (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

SILICATE BINDERS

CAS: 10006-28-7

OSHA PEL 5 MG/M3 RDUST (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

TITANIUM OXIDE; (TITANIUM DIOXIDE) (TIO*2)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

MINERAL SILICATES (MAY CONTAIN INGS 11 - 13)

OSHA PEL N/K

ACGIH TLV: N/K

SILICATE, MICA; (MICA)

CAS: 12001-26-2

RTECS: VV8760000

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST

FELDSPAR; (POTASSIUM FELDSPAR)

CAS: 68476-25-5

OSHA PEL 5 MG/M3 RESP (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

ZIRCONIUM; (ZIRCONIUM SILICATES)

CAS: 7440-67-7

RTECS: ZH7070000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3;10 STEL

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

IRON; (FE)

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10 MG/M3 TDUST (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

SP, PUBLISHED BY AWS, P.O. BOX 351040, MIAMI, FL

RTECS: 9999999ZZ

PUBLISHED BY NFPA, BATTERYMARCH PARK, QUINCY, MA

RTECS: 9999999ZZ

WORKED, PROCESS, PROCS & CONSUMABLES USED,

RTECS: 9999999ZZ

QUALITY & AMT OF VENT, POSITION OF WELDER'S HEAD

RTECS: 9999999ZZ

WHEN MATLS ARE CONSUMED, FUME & GAS DECOMP PRODS

RTECS: 9999999ZZ

FOR MORE SPECIFIC INFORMATION, CONTACT NEHC .

RTECS: 9999999ZZ

OF EXPOS. CHANGES SEEN ARE NOT NECESSARILY

RTECS: 9999999ZZ

CHANGES ON X-RAYS MAY BE CAUSED BY NON-WORK FACTORS

RTECS: 9999999ZZ

IARC MONOGRAPHS, VOL 49, PG

RTECS: 9999999ZZ

LUNGS,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES CAN BE DANGEROUS TO YOUR
HLTH. ELEC SHOCK CAN KILL YOU. ARC RAYS CAN INJURE EYES & BURN
SKIN. NOISE CAN DMG HEARING. ACUTE:SHORT TERM OVEREXP TO GASES,
FUMES & DUSTS MAY INCL IRRIT OF EY ES, LUNGS, NOSE & THROAT. SOME
TOX GASES ASSOC W/WELDING MAY CAUSE PULM EDEMA, ASPHY & DEATH.
ACUTE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC
MONOGRAPHS, VOL 68, 1997:GRP 1. NTP 7TH ANNUAL RPT ON CARCINS,
1994:ANTIC TO BE (ING 24)
Effects of Overexposure:HLTH HAZ:OVEREXP MAY INCL SIGNS & SYMPS SUCH AS
WATERY EYES, NOSE & THROAT IRRIT, HDCH, DIZZ, DFCLTY IN BRTHG,
FREQUENT COUGH/CHEST PAIN. CHRONIC:LONG TERM OVEREXP TO AIR CONTAMS
MAY LEAD TO THEIR ACC UM IN LUNGS, CNDTNS WHICH MAY BE SEEN AS
DENSE AREAS ON CHEST X-RAYS. SEVERITY OF CHANGE IS PROPORTIONAL TO
LGTH(ING 22)
Medical Cond Aggravated by Exposure:INDIVIDUALS W/ALLERGIES OR IMPAIRED
RESP FUNC MAY HAVE SYMPS WORSENED BY EXPOS TO WELDING FUMES.
HOWEVER, SUCH REACTION CANNOT BE PREDICTED DUE TO VARIATION IN
COMPOSITION & QTY OF DECOMP PRODUCTS.

First Aid:IN CASE OF EMER, CALL FOR MED AID. EMPLOY FIRST AID TECHNIQUE
REC BY RED CROSS. FOR ELEC SHOCK, DISCONNECT & TURN OFF POWER.
INGEST:CALL MD IMMED . EYES:IMMED FLUSH W/POTABLE WATER FOR MIN OF
15 MINS, SEEK ASSISTANCE FROM MD . INHAL:IF BRTHG IS DFCLT, GIVE
OXYG & CALL FOR MD. IF NOT BRTHG, BEGIN ARTF RESP, PREF
MOUTH-TO-MOUTH. IF NO DETECTABLE PULSE, BEGIN CPR. IMMED CALL MD.
(SUPDAT)

Extinguishing Media:USE EXTINGUISHING MEDIA RECOMMENDED FOR BURNING
MATERIALS & FIRE SITUATION.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . ONLY PACKAGING FOR THIS PRODUCT WILL BURN.
Unusual Fire/Explosion Hazard:PROD WILL NOT BURN. HOWEVER, WELDING ARCS
& SPKS CAN IGNITE COMBUST & FLAMM MATLS. SEE ANSI Z49.1, "SFTY IN
WELDING & CUTTING" & "SAFE PRACTICES" CODE: (ING 16)

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF
FUMES. TRAIN WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS & TO
INSULATE HIMSELF FROM WORK & GROUND.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PRECAUTIONARY
LBL ON THIS PROD. SEE ANSI Z49.1, "SFTY IN WELDING & CUTTING",
PUBLISHED BY AWS, P.O. BOX 351040, MIAMI, FL 33135 & OSHA
PUBLICATION 2206 (29 CFR 1 910), U.S. GOVT PRINTING OFFICE,(SUPDAT)

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHST AT ARC, OR BOTH, TO KEEP FUMES
& GASES BELOW TLV'S IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . ARM PROTECTORS, APRONS, HATS, SHOULDER PROT, AS WELL AS
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:WELDING ELECTRODES. FIRST AID PROC:SKIN:FOR
ARC BURN APPLY COLD, CLEAN COMPRESSES & CALL MD. OTHER
PREC:WASHINGTON, D.C. 20402 FOR MORE DETAILS. OTHER PROT EQUIP:DARK
SUBSTANT IAL CLTHG. FOR MORE INFO CONT NEHC . EYE PROT:FULL LGTH
FSHLD, W/FILTER LENS. FOR MORE INFO CONT NEHC.

Appearance and Odor:FLUX COATED STEEL CORE WIRE; ODORLESS.

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
MATL BEING (ING 18)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.